This is 3 Ports SATA + 1 IDE PCI I/O Controller Card, which owns 1 external SATA port, 2 internal SATA ports and 1 internal IDE port !

Features:

1. Extend your system around 1 external SATA port, 2 internal SATA port, 1 internal IDE port.
2. PCI Interface:
   • 33 MHz operation.
   • Support PCI 2X mode and PCI native mode.
   • Compliant with PCI Local Bus Specification Revison 2.2.
3. 1 internal IDE port:
   • Single channel master mode hard disk controller supports two enhanced IDE devices.
   • Redefined Bus Master Programming interface for IDE controllers to support up to four bus masters in a single function
   • Compliant with PCI IDE Controller Specification Revision 1.0
   • Extension to Ultra DMA-133 interface for up to 133MB/s transfer rate.
   • Supports Microsoft generic ide operation and Intel bus master DMA operations.
4. 1 external SATA port & 2 internal SATA port:
   • Serial ATA (SATA) Host Controller chip with 32-bit interface.
   • Compliant with Serial ATA Specification Revision 1.0
   • Dual channel master mode PCI supports up to two SATA devices.
   • Support internal PHY with each PHY supporting up to two SATA devices.
   • Support data transfer rates up to 150MBps per SATA channel.
5. Power Supply:
   • 3.3V for PCI and IDE operation.
   • 2.5V for Oscillator and Serial ATA port operation.
6. NOTE: nonsupport "RAID" function. Hard drive connected on the SATA interface can be uséd for the storage disk, but not for the system disk

Specifications:

• Device Type: SATA + IDE PCI I/O Controller Card
• Interface Type: 1 x external SATA port;2 x internal SATA port, 1 x internal IDE port
• Chipset: VIA VT6421A
• Supported System: Windows 98SE/ME/NT4.0/2000/XP

Package Includes:

• 1 x IDE PCI Controller Card
• 1 x Drive CD